Install Example Video
Basic Install Guide
Step by Step Instructions
1 Dig the hole according to the specifications provided and level the area.
2 Place the bottom rails into the designated spots.
3 Set the wall panels into the bottom rails.
4 Snap on the top rails once the wall panels are in place.
5 Square the pool in the hole and brace for backfill.
6 Pour concrete around the bottom perimeter of the pool to a depth of 8-12 inches to lock it in place. Using fiberglass rebar is recommended to keep everything metal-free.
7 Install the plumbing, outlets/inlets, and lights as per the requirements.
8 Pressure check all plumbing for leaks - this is highly recommended.
9 Begin the backfill process after ensuring all walls are straight, braced, and square.
10 Install the liner receiver on the top ledge of the pool walls.
11 Pour the concrete top perimeter bond beam to finish the top perimiter of pool.
12 Insert the liner and fill the pool with water.
Once complete, you're ready to enjoy your new B Squared Pool! Don't hesitate to contact us if you need further guidance during the installation process.
Copyright © 2024 B Squared Pools - All Rights Reserved.
Powered by GoDaddy